DESCRIPTION
The Rotur Long Series Lip and Spur Drill Bit, measuring 5/16' x 24', is a top - notch choice for lamp making. It allows you to effortlessly drill long holes for cables. This bit pairs extremely well with the Rotur Hollow Rotating centre and the Counterbore Drive Centre. With an overall length of 24' and a width of 5/16', and a 6' long flute, it comes neatly packed in a plastic sleeve with a euro slot. Thanks to its steeper helix angle compared to standard drill bits, it's the go - to cutting tip for drilling wood. The deeper flutes ensure rapid waste clearance, enabling fast and clean cuts. The brad point tip guarantees straight and accurate drilling, while the sharp spurs minimize grain tear - out for a clean edge. SKU: LSLC516.
Using this Rotur Long Series Lip and Spur Drill Bit is easy. First, make sure your workpiece is firmly secured. Then, align the bit at the desired drilling spot. Start the drill at a low speed and gradually increase it as you start to penetrate the wood. When drilling long holes for cables in lamp making, take your time to ensure the hole is straight. As for maintenance, after each use, wipe the bit clean with a dry cloth to remove any wood shavings. You can also use a light oil to prevent rust. Store it in the provided plastic sleeve to protect it from damage. Be careful not to use excessive force while drilling, as it may damage the bit or cause inaccurate holes.
