DESCRIPTION
Abranet sanding strips, sized at 70x125mm, are a game - changing sanding solution. This innovative sanding material features thousands of tiny holes, allowing for efficient dust and particle vacuuming. As a result, the disc surface remains unclogged, delivering a super - smooth and evenly sanded finish. By significantly reducing airborne dust, it greatly enhances the work environment. Abranet is engineered for sanding a wide range of materials, including fillers, primers, lacquers, and composites. This long - lasting sanding material comes in an assorted pack with 5 grits (180, 240, 320, 400, and 600 grit), each having 5 sheets. The 500 - grit option is identified as A5414905051.
Using these Mirka Abranet sanding strips is straightforward. First, select the appropriate grit for your sanding job. For rougher surfaces, you might want to start with a lower grit like 180, and for finer finishing, go for a higher grit such as 600. Attach the strip to your sanding tool securely. While sanding, keep the vacuum system running to effectively suck away the dust. This will not only keep your work area clean but also extend the life of the strip. When sanding, apply even pressure to get a uniform sanding pattern. As for maintenance, after each use, make sure to clean the strip gently. You can use a soft brush to remove any remaining dust. Store the strips in a dry place to prevent them from getting damaged. If the strip starts to clog or doesn't sand as effectively, it's time to replace it with a new one.
