DESCRIPTION
This amazing submersible pump is a perfect choice for heavy - duty draining jobs. It can handle draining tasks in pits, sumps, ditches, footings, and more. Whether it's clean water or dirty water with particles up to 35mm in diameter, this pump can remove it all. The integrated float switch is a great feature. Once the water level drops to a set level, it automatically shuts off the pump motor. And since it's integrated into the pump housing, it can be used in smaller spaces compared to regular float switches. Features include a 750W 230V motor, selectable manual or auto mode (in auto mode, the float switch turns the pump off when water level falls), an outlet size of 1 1/2' BSP with elbow and 4 - step adaptor (also compatible with 1' BSP/Hose, ¾' hose, ½' hose), a rated maximum flow rate of 217 l/min, a head range from 0m to 8m, a max depth of 7m with a 10m cable length, and it weighs just 4.5kg. It also comes with a 1 - year manufacturer warranty.
Using this Clarke submersible pump is easy. First, decide if you want to use the manual or auto mode. In auto mode, the integrated float switch will do the job for you - it turns the pump off when the water level drops. In manual mode, you control the start and stop. Place the pump in the area you want to drain, like a pit or a sump. Make sure the outlet is properly connected using the adaptors provided. When using it, keep in mind that the pump can handle water with particles up to 35mm in diameter, but try to avoid large debris that could clog it. Also, don't submerge it deeper than 7m. For maintenance, after each use, clean the pump to remove any dirt or particles. Check the cable regularly for any signs of damage. And remember, it comes with a 1 - year manufacturer warranty, so if there are any problems, contact the manufacturer.
