DESCRIPTION
This Draper submersible dirty water pump is a great choice for various applications. It's perfect for emptying inspection pits, ditches, and footings where there might be suspended solids. It also works well for general irrigation tasks. The pump comes with thermal overload protection, which keeps it safe from overheating. The float switch is a handy feature that automatically shuts off the pump when the water level drops. It has a 10M (approx.) cable with an approved plug and comes in a display carton. Specification details include a 230V voltage, a maximum output of 166L/min, a maximum head height of 8.5M, a 550W motor, a float switch, a 32mm output aperture diameter, a maximum particle diameter of 30mm, and a 19mm hose adaptor diameter. There's also a 1 - year manufacturer warranty.
Using this Draper submersible dirty water pump is easy. First, make sure the pump is fully submerged in the water you want to pump out. Connect the 10M cable to a power source using the approved plug. The float switch will do its job automatically, turning the pump off when the water level is low. When using it, don't let the pump run dry as this can damage it. Also, keep an eye on the thermal overload protection. If it trips, it means the pump is getting too hot, so turn it off and let it cool down. For maintenance, regularly check the pump for any debris or blockages, especially around the output aperture and the hose adaptor. Clean the pump as needed to keep it working well. Remember, it comes with a 1 - year manufacturer warranty, so if you have any problems, you can contact the manufacturer.
