These Type 17 screws are super-sharp and cut down on the need for pre-drilling. They have self-countersinking cutting nibs and a flat head, giving a clean finish every time. The deep, sharp threads easily cut through fibrous materials, using less torque to drive the screw. The next-gen lubrication system means you only need about half the torque compared to regular screws. The knurled shank ribs further reduce the installation torque. They help prevent wood splitting, clean the hole, and stop jacking when joining two pieces of timber. The Star drive recess reduces cam out and end load, with twice the drive torque of Pozi or square drive, preventing spinning and damage to the fastener. Recess sizes from T10 to T30 match the screw torque needs. The optimized thread lengths prevent cross threading and jacking, pulling the wood together on the first try. Features include an advanced cutting geometry slash point with an anti-walk tip that cuts down on pre-drilling, lubricated serrated threads that cut through materials with much less torque, self-countersinking cutting nibs and a true flat head for a clean finish, and a Trx drive recess that reduces cam out and end load, preventing spin and fastener damage. There's a 1-year manufacturer warranty. Customers need to register the product on the manufacturer's website.
Using these Fixman Goldstar screws is easy. First, you don't always have to pre-drill because of the anti - walk tip. But if you're working with very hard wood, it's a good idea to pre - drill a small hole. When driving the screw, use a screwdriver with the right size Star drive bit (T10 - T30) to match the screw. This will help you avoid cam out and spinning. To join two pieces of timber, place the screws at the right spots and start driving. The screws will pull the wood together nicely and prevent splitting. After use, keep the screws in a dry place to prevent rust. If you have any issues, remember you can register the product on the manufacturer's website for the 1 - year warranty.
