These Type 17 screws are super - sharp and cut down on the need for pre - drilling. Their self - countersinking cutting nibs and flat heads ensure a clean finish every time. The deep, sharp threads easily penetrate fibrous materials, using less torque compared to regular screws. The next - gen lubrication system means you only need about half the torque of conventional screws to drive them in. The knurled shank ribs further lower the installation torque. They're great for preventing wood splitting, cleaning the hole, and avoiding jacking when joining two pieces of timber. The Star drive recess reduces cam out and end load, with twice the drive torque of Pozi or square drives, so there's no spinning or fastener damage. Recess sizes from T10 to T30 match the screw's torque needs. The optimized thread lengths stop cross - threading and jacking, pulling wood together on the first try.
FEATURES
- Advanced cutting geometry with an anti - walk tip slashes the need for pre - drilling
- Lubricated serrated threads cut through materials with much less required torque
- Self - countersinking cutting nibs and true flat heads always give a clean finish
- Star drive recess reduces cam out and end load, eliminating spin and fastener damage
Warranty
1 year manufacturer warranty*. Customers must register the product on the manufacturer's website.
Using these screws is easy. First, no need to pre - drill in most cases because of the anti - walk tip. Just place the screw where you want it and start driving. Use a screwdriver with a Star drive bit that matches the recess size (from T10 to T30) for best results. When joining two pieces of timber, these screws will help prevent splitting and jacking. Remember, they need about half the torque of regular screws, thanks to the lubrication system, so don't over - tighten. For maintenance, keep them in a dry place to prevent rust. If they get dirty, you can clean them with a dry cloth. Also, make sure to register the product on the manufacturer's website to get the 1 - year warranty.
