Neilsen / Jobsite CT2437 Gasoline Water Pump 3 inch

Neilsen Jobsite 3 - inch Gasoline Water Pump

• 3 - inch (75mm) water pump powered by a petrol engine
• Maximum lift height of 24m (85ft)
• Effective suction up to 6m (28ft)
• High - volume delivery: 600 litres or 158 gallons per minute
• Powerful 2.8ps engine running at 3600rpm

Using this Neilsen Jobsite gasoline water pump is easy. First, make sure the petrol tank has enough fuel and the engine is in good condition. Then, connect the water inlet and outlet hoses properly. Start the engine following the instructions on the engine. Once the engine is running, the pump will start moving water. When using, keep an eye on the water level and engine temperature. If the engine overheats or there's an abnormal noise, stop the pump immediately. For maintenance, regularly check the oil level in the engine. Change the oil as recommended in the engine manual. Also, clean the pump and hoses after each use to prevent blockages and ensure long - term performance.