Clarke PF75A 3 petrol full trash pump

The Clarke full trash pump is a high - performance petrol - powered water pump. It's perfect for draining pits, pools, trenches, and foundations, and also great for field irrigation. The pump body is strong enough to handle sand and suspended solids up to 28mm in size. It comes with hose connections and an intake strainer.Features: It's equipped with a powerful 208 cc, 6.3 hp 4 - stroke petrol engine. It can run for 2 hours and 45 minutes at 75% load with an RPM of 3600. The maximum output flow is 1300L/min, and the maximum output head (lift height) is 28m. The maximum suction head is 8m, and the outlet size is 3” BSP. The rated max. pressure is 2.8 bar (40.6 psi). It has dimensions of 550x430x455mm and weighs 39.5 kg. It also comes with a 1 - year manufacturer warranty.

Using your Clarke PF75A 3 petrol full trash pump is easy. First, make sure it's on a flat and stable surface. Connect the hose to the outlet and attach the intake strainer. Fill the fuel tank with the right type of petrol. Start the engine following the instructions in the manual. Once it's running, place the intake in the water you want to pump. You can use it to drain pits, pools, trenches, and foundations or for field irrigation. When using, be careful not to let large objects that are bigger than 28mm get into the pump. This can damage the pump body. Also, make sure the engine is properly maintained. Check the oil regularly and change it as recommended. Keep the pump clean after each use. If there are any issues, refer to the 1 - year manufacturer warranty.