DESCRIPTION
The Rotur Finial Insert Set comes with 3 Delrin inserts in sizes 3mm, 4.5mm, and 6mm, designed specifically for the Rotur Finial Mandrel. These inserts can be easily drilled or adjusted to meet your project needs. The Rotur Finial Mandrel is a special product that fits into the tailstock, providing excellent support for the finial's fine end. This enables you to turn workpieces to a very small diameter without the risk of snapping or bending. Three Delrin inserts with 3mm, 4.5mm, and 6mm holes are included, and you can switch them according to the finial size you're working on. They fit snugly into the inner race of the free - running bearing in the mandrel body. You can drill or modify the inserts as per your requirements. A spare set of the 3 inserts (FIS1) is also available. Crafted from high - quality EN8M Steel, the Rotur Finial Mandrel is available in 1MT and 2MT sizes and is proudly made in the UK by Planet Plus Ltd.
Using the Rotur Finial Mandrel is quite simple. First, fit the mandrel into the tailstock. Then, select the appropriate Delrin insert from the set based on the size of the finial you're turning. Place the insert into the inner race of the free - running bearing in the mandrel body. Now you're ready to start turning your workpiece to a small diameter safely. When using the inserts, you can drill or modify them if the standard sizes don't fit your project. Just use common drilling tools to adjust them. As for maintenance, keep the mandrel and inserts clean. After each use, wipe them down with a clean cloth to remove any debris. Store them in a dry place to prevent rusting. If you need additional inserts, you can purchase the spare set (FIS1). Also, be careful when turning to avoid applying too much pressure that could damage the mandrel or the workpiece.
