DESCRIPTION
This tyre inflator is made to meet EN 12645 standards. It features an anodized black aluminum body with a rubber bumper for added protection. The linear pressure scale is dual - calibrated in psi and bar, with parallax correction for accurate readings. A 0.5m flexible hose comes with a 240mm twin push - on air connector for easy use. You'll also get a serial - numbered calibration certificate. It comes with a 3 - year guarantee*. The inlet size is 1/4' BSP, with a maximum air supply of 15 bar (218 psi) and a minimum of 5.5 bar (80 psi). The net weight is 0.87 kg, and it has a range of 0 - 9.6 bar (0 - 140 psi). There's a 3 - year parts and labour guarantee on the main power transformer of Arc and MIG Welders, starting with a 1 - year guarantee that can be extended by 2 more years by registering your purchase online.
Using this tyre inflator is easy. First, make sure your air supply meets the minimum requirement of 5.5 bar (80 psi). Connect the 0.5m flexible hose to the air source using the 1/4' BSP inlet. Then, attach the twin push - on air connector to the tyre valve. You can easily read the pressure on the linear scale, which shows both psi and bar. When you're done, disconnect the connector carefully. Remember, don't exceed the maximum air supply of 15 bar (218 psi) to avoid damaging the inflator. For maintenance, keep the anodized black aluminum body clean and dry. If there's any damage to the rubber bumper, it's a good idea to replace it. Also, make sure to register your purchase online to extend the guarantee to 3 years.
