DESCRIPTION
This heavy-duty submersible cutter pump by Clarke is a perfect fit for agricultural and industrial needs. It's designed to handle highly polluted wastewater that contains light slurry, sewage, and waste solids up to 40mm in diameter. The pump comes with an automatic shutdown feature that activates when the water level drops, and thermal cut-out overload protection to ensure long - term durability. Key features include a maximum flow rate of 430 litres per minute, a head range from 1.5 to 13 meters, a float switch for automatic water - level control, a sturdy cast iron base, twin seals, and a TCT cutting plate. It has a 2” BSP outlet with a 50mm hose adaptor, can operate at a maximum depth of 6 meters, and is powered by a 1400W, 230V motor with a 10 - meter cable. The pump weighs 29.9kg and comes with a 1 - year manufacturer warranty. Click here for the product manual.
Using the Clarke HSEC1400A submersible cutter pump is straightforward. First, make sure the pump is placed in a stable position at a depth of no more than 6 meters. Connect the 50mm hose adaptor or the 2” BSP outlet to your desired drainage system. Plug the 10 - meter cable into a 230V power source. The float switch will automatically turn the pump on when the water level rises and off when it drops. As for maintenance, regularly check the twin seals and the TCT cutting plate for wear and tear. Clean the pump to prevent clogging, especially after handling waste solids. Keep an eye on the thermal cut - out overload protection, and if it trips, check for any issues like overheating or blockages. Remember, this pump is under a 1 - year manufacturer warranty, so in case of any major problems, contact the manufacturer.
