Neilsen CT5304 Saw Blade Sharpener with Bench Mounting

This Neilsen CT5304 saw blade sharpener is a great tool for keeping your saw blades in top - notch condition. It's perfect for sharpening TCT saw blades with diameters ranging from 90mm to 400mm. The included Ø103mm diamond - coated grinding disc helps enhance the performance of TCT saw blades. You'll also get 1 ceramic disc for non - TCT blades and 1 diamond - coated grinding disc for TCT blades. Key features include precise 0 - 25° angle adjustment, so each blade tip gets sharpened evenly. It's fast and easy to use, saving you money by reducing the need to buy new blades frequently. It runs on 230V~50HZ, has an input power of 110W (S3 50% with 900s ON and 900s OFF), a no - load speed of 5300/min, a maximum wheel diameter of 103mm, and is suitable for circular saw blades with diameters from 90 - 400mm.

Using this saw blade sharpener is quite straightforward. First, make sure the power is off and the sharpener is on a stable surface. For TCT blades, use the diamond - coated grinding disc. For non - TCT blades, switch to the ceramic disc. Adjust the angle between 0 - 25° according to your blade's requirements to ensure an even sharpening. Then, turn on the sharpener and carefully guide the blade against the grinding disc. Remember to always wear safety goggles and gloves when operating. When not in use, keep it in a dry place. Periodically check the grinding discs for wear and replace them if they're too worn out. Also, make sure to clean the sharpener regularly to remove any debris that may affect its performance.