These Type 17 screws are super-sharp and cut down on the need for pre-drilling. The self-countersinking cutting nibs with a flat head give a neat finish every time. Their deep, sharp threads easily cut through fibrous materials, using less torque than normal. The next-gen lubrication system means you only need about half the torque compared to regular screws. The knurled shank ribs further lower the installation torque. They help stop wood from splitting, clean the hole, and prevent jacking when joining two pieces of wood. The Star drive recess reduces cam out and end load, with twice the drive torque of Pozi or square drive, so there's no spinning or fastener damage. Recess sizes from T10 to T30 match the screw's torque needs. The optimized thread lengths prevent cross threading and jacking, pulling the wood together right away.
FEATURES
- Advanced cutting geometry with a slash point and anti-walk tip cuts down pre-drilling
- Lubricated serrated threads cut through materials, greatly reducing required torque
- Self-countersinking cutting nibs and a true flat head ensure a clean finish
- Trx drive recess reduces cam out and end load, preventing spin and fastener damage
Warranty
There's a 1-year manufacturer warranty*. You need to register the product on the manufacturer's website.
Using these screws is easy. First, you don't need to pre-drill much thanks to their anti-walk tip. Just position the screw where you want it and start driving. The Star drive recess works well with a compatible driver, and you'll notice it takes less effort to turn the screw in. When joining two pieces of wood, these screws will help prevent splitting and give a tight fit. As for maintenance, keep them in a dry place to avoid rusting. Remember, you need to register the product on the manufacturer's website to get the 1-year warranty. Also, make sure to use the right size of driver for the recess to avoid any damage to the screw or the driver.
