This Neilsen CT3823 bench drill is a powerful and reliable tool. It operates on a 230V/50Hz motor with 350W of power. It has 5 spindle speeds and a no - load motor speed of 1450rpm. The chuck size is B16, suitable for drill bits from 1.5 to 13mm. The spindle taper is B16, and the maximum drilling depth is 50mm. The table size is 160×160mm, with a tilting range from 0° to 45°. The base size is 290×190mm, column diameter is 46mm. The distances from the spindle to the column, table, and base are 104mm, 200mm, and 290mm respectively. The overall height is 580mm, and it weighs 15/16kgs gross/net. The motor uses cooper wire, ensuring high - efficiency performance.
Using this Neilsen CT3823 bench drill is easy. First, plug it into a 230V/50Hz power source. Then, choose the right drill bit according to your needs and install it in the chuck. Adjust the spindle speed based on the material you're drilling. Place your workpiece on the table and adjust the table's position and tilt as required. When starting to drill, apply steady pressure. Remember to wear safety goggles to protect your eyes. Don't touch the drill bit while it's rotating. For maintenance, keep the drill clean after each use. Wipe off any dust or debris. Check the cooper wire regularly for any signs of damage. Lubricate the moving parts occasionally to ensure smooth operation. If you encounter any problems, stop using the drill immediately and seek professional help.
