This Neilsen CT3824 bench drill is a high - performance tool. It operates on a 230V/50Hz motor with a power of 500W. The spindle offers 16 speed settings, and the motor has a no - load speed of 1450rpm. The chuck size ranges from 3mm to 16mm (B16), and the spindle taper is MT2. It can drill up to a maximum depth of 80mm. The table, sized at 290mm, can tilt from 0° to 45°. The base measures 250×420mm, and the column diameter is 70mm. The distances from the spindle to the column, table, and base are 170mm, 450mm, and 640mm respectively. The overall height is 980mm, and it weighs 43/45kgs (gross/net). The motor uses copper wire for efficient performance.
Using the Neilsen CT3824 bench drill is easy. First, make sure to plug it into a 230V/50Hz power source. Adjust the spindle speed according to your drilling needs, with 16 different speed settings available. Place your workpiece on the table and adjust the table's tilt angle from 0° to 45° if required. Select the appropriate chuck size (from 3mm to 16mm) for your drill bit. When drilling, apply steady pressure. Remember, the maximum drilling depth is 80mm, so don't force it beyond that. For safety, always wear protective goggles. When not in use, unplug the drill. To maintain it, clean the drill regularly, especially the chuck and the spindle. Check the copper - wired motor periodically for any signs of damage. Keep the drill in a dry place to prevent rusting.
