Powerful 9 - inch Bandsaw
This bench - mounted bandsaw is crafted to high standards, making it a top pick for trade experts. It's designed to slice through wood, wood - based materials, and plastics with ease.
Get precise cuts thanks to the adjustable blade tensioning and tracking. There's a high - quality mitre guide for cross - cutting tasks. The sturdy table can tilt from 0 to 45 degrees, enabling angled, ripping, mitre, and bevel cuts. A no - volt release switch stops the blade from restarting unexpectedly after a power cut. It comes with a 10tpi blade, parallel rip fence, and other useful accessories.
Features of Draper BS228/300D 228mm (9') Band Saw:
- Adjustable blade for accurate cutting
- Graduated mitre guide up to 30 degrees for left and right angles
- Table tilts 0 - 45 degrees
- Equipped with a no - volt on/off switch and 53mm dust extraction outlet
- Comes with 10tpi blade, parallel rip fence, and accessories
Contents of the Band Saw Set:
- 1 X 228mm, 300W Bandsaw
- 1 x 10tpi blade
- 1 x Parallel rip fence
- 1 x Open - ended spanner
- 1 x Push stick
- 1 x Hex key
Specifications:
| Voltage: 230V |
| Frequency: 50Hz |
| Input: 300W |
| No load speed: 1400rpm |
| Maximum throat capacity: 228mm |
| Cutting depth: 90mm |
| Maximum capacity: 125mm |
| Cutting speed: 10.6m/sec (635m/min) |
| Table size: 300 x 300mm (Tilt to 45 degrees) |
| Bandsaw dimensions: 510 x 370 x 755mm |
| Weight: 19kg |
Product manual
Product manual of Draper BS228/300D 228mm Band Saw (230V)
Part list of Draper BS228/300D 228mm Band Saw (230V)
Warranty
1 year manufacturer warranty.
Using your Draper band saw is easy. First, make sure it's properly plugged into a 230V power source. Adjust the blade tension and tracking according to the material you're cutting for precise results. When doing cross - cuts, use the mitre guide. You can tilt the table to the desired angle between 0 and 45 degrees for different cutting tasks. Always keep the dust extraction outlet connected to reduce mess. Before starting, double - check that all the parts are secure and the blade is in good condition. When the power goes out, the no - volt switch will prevent the blade from restarting on its own. For maintenance, regularly clean the saw to remove dust and debris. Check the blade for wear and replace it if necessary. Keep the moving parts lubricated. And remember, this band saw comes with a 1 - year manufacturer warranty, so if you have any issues, reach out to the manufacturer.
