The Triton TSPL152 is a super - powerful 1100W surface planer that can smoothly plane both wood and plastic surfaces. It comes with a generous 152mm (6") planing width and a large 770 x 260mm table surface, providing ample space for your work. The dual - bladed cutting block operates at 16,000 cuts per minute, efficiently removing material with a single - pass maximum depth of cut of 3.2mm (1/8"). The extruded aluminium fence can tilt from 45° to 135° and has preset stops for easy adjustment. The package includes a guide fence, blade drum guard, push stick, 2 push blocks, hex spanner, and 2 hex keys. Enjoy a 3 - year manufacturer warranty, but you need to register the product on the manufacturer's website.
Using the Triton TSPL152 surface planer is quite easy. First, make sure the planer is properly set up on a stable surface. Place your wood or plastic material on the large table surface. Adjust the extruded aluminium fence to the desired angle between 45° and 135° using the preset stops. The dual - bladed cutting block will do the heavy - lifting. Just feed the material slowly through the planer. Remember, the maximum depth of cut in a single pass is 3.2mm (1/8"), so don't try to take off too much at once. When using, always hold the material firmly with the push stick and push blocks to keep your hands safe. After each use, clean the planer to remove any sawdust or debris. Regularly check the blades for sharpness and replace them if they are dull. Also, keep all the included tools like the hex spanner and hex keys in a safe place for future adjustments. And don't forget to register your product on the manufacturer's website to get the 3 - year warranty.
