DESCRIPTION
This Sealey random orbital dual action sander offers a patented eccentric assembly with sealed double bearings, providing an impressive Ø9mm orbital diameter. It features variable speed control, allowing you to adjust the speed from 2000 - 4600rpm to suit different sanding tasks. The sander comes with a two - metre mains cable and a BS - approved plug for convenient use. Its alloy bevel gear head and smooth composite motor housing enhance comfort during operation. The side - mounted slider type power control with a power lock gives you easy and secure control. It is supplied with a Ø150mm hook - and - loop pad and a handle. Consumable parts include the PTC/150SA (Ø145mm DA Backing Pad 5/16'UNF, Soft) and PTC/150VA (Ø145mm DA Backing Pad Hook - and - Loop 5/16'UNF, Hard), along with the DAS150T.V5 - 33 carbon brush. With a motor power of 710W and a net weight of 2.45kg, it's a powerful yet manageable tool. The no - load speed ranges from 2000 - 4600rpm. Optional accessories like the PTC/150SA pad are available. The orbit size is Ø9mm, and the pad size is Ø150mm. Replacement parts such as the PTC/150VA pad are also provided. It runs on a 230V supply and has a 5/16'UNF thread size. There's a 1 - year manufacturer warranty for peace of mind.
Using the Sealey random orbital dual action sander is quite straightforward. First, make sure the power is off and connect the sander to a 230V power source using the two - metre mains cable and the BS - approved plug. Attach the Ø150mm hook - and - loop pad to the sander. You can adjust the speed from 2000 - 4600rpm according to the sanding task you're doing. For lighter sanding, use a lower speed, and for more heavy - duty jobs, go for a higher speed. When using the sander, hold it firmly with the handle and move it gently across the surface you're sanding. Keep in mind to always wear appropriate safety gear, like goggles and a dust mask, as sanding can create a lot of dust. As for maintenance, after each use, unplug the sander and clean it. You can use a soft brush to remove dust from the motor housing and other parts. The consumable parts like the carbon brush and backing pads may need to be replaced over time. Refer to the product specifications for the correct replacement parts. If you have any issues, remember that the sander comes with a 1 - year manufacturer warranty, so you can contact the manufacturer for support.
