Draper 37190 680Kg Motorcycle Hydraulic Lift Table
This large - scale lift is a versatile solution. It can support motorcycles, all - terrain vehicles (ATV), mini tractors, and other similarly sized vehicles. The supplied extra side platforms increase the width for easy accommodation.
Built with all - steel construction, it features a heavy - duty foot - operated dual hydraulic pump and a pneumatic pump - up system with a controller and ram assembly. There's also a safety table lock to prevent unexpected lowering.
The removable front wheel clamp and rear panel make rear wheel changes on motorcycles a breeze. The base comes with transport wheels and lock - downs to keep the lift steady during use.
Features
- Hydraulic - powered mechanism
- Max working height of 885mm
- 680kg (1500lbs) capacity
- Lifting range from 200 to 885mm
Specifications
- Capacity: 680kg (1500lbs)
- Operating air pressure: 90psi (6.2bar)
- Air inlet: 1/4'BSP
- Lifting range: 200 - 885mm
- Working height stops at 550, 720, 840mm
- Max height: 885mm
- Closed height: 200mm
- Motorcycle lift table size (L x W): 1950 x 680mm
- ATV use table size (L x W): 1950 x 1220mm
- Motorcycle loading ramp size (L x W): 850 x 150mm
- Rear wheel removal panel size (L x W): 600 x 250mm
- Weight: 260kg
Product video
Product manual
Product manual and part list of Draper 37190 680Kg Motorcycle Pneumatic and Hydraulic Operation Lift Table
Using the Draper 37190 lift table is quite straightforward. First, position the lift where you plan to work and use the lock - downs on the base to keep it steady. If you're lifting a motorcycle, use the loading ramp to get it onto the table. For ATVs or other wider vehicles, attach the supplied side platforms. Use the foot - operated dual hydraulic pump or the pneumatic pump - up system to start lifting. You can stop at the pre - set working heights of 550, 720, or 840mm. For rear wheel changes on motorcycles, remove the front wheel clamp and rear panel. When you're done, slowly lower the table using the controls. Make sure to keep the air pressure at 90psi (6.2bar) for proper operation. As for maintenance, regularly check the hydraulic system for leaks. Keep the steel parts clean to prevent rust. Also, inspect the transport wheels and lock - downs to ensure they're in good condition. Always use the safety table lock to prevent accidental lowering.
