DESCRIPTION
Build a stunning deck with the Kreg® Deck Jig™. This concealed - fastening system teams up with Kreg Deck Screws to install decking without visible fasteners, so you can focus on the deck's beauty. The Deck Jig has hardened - steel guides for precise pilot holes and invisible, solid attachment of deck boards, whether you're using solid - wood or composite ones. Three hardened - steel guides (one at 90° to the board edge and two at 45° angles) make drilling and screwing easy in all situations, like near walls or at board joints. The stepped drill bit creates a well - positioned pocket and clearance hole for the Kreg Deck Screw, and a stop collar ensures perfect depth. After drilling, drop in a Kreg Deck Screw and use the included square - drive driver bit with its own stop collar. The screw's aggressive threads grip the joist, and its smooth shank and flat - bottom head pull the deck board tight. This system works with composite and solid - wood decking like cedar, hardwoods, and pressure - treated wood (KDAT recommended). Check our Screw Selector to pick the right screws. Features include concealed fastener installation, three hardened - steel drill guides, an impact - resistant polymer and hardened - steel construction, an easy - grip handle, accurate deck board spacing with spacer rings, and the ability to install in hard - to - reach areas. Compatible with Protec - Kote™ Deck Screws, Stainless Deck Screws, 1/4' Spacer Rings, Deck Jig Drill Bit Set, and Deck Jig Driver Bit Set. It comes with a Deck Jig, Drill Bit, Driver Bit, two Stop Collars, a Hex Wrench, three ¼' Spacer Rings, and an Owner's Manual. It has a 1 - year warranty.
Using the Kreg Deck Jig™ is easy. First, decide if you're using solid - wood or composite deck boards. Then, place the jig on the edge of the deck board. Use the hardened - steel guides to drill pilot holes with the stepped drill bit. The stop collar on the drill bit will help you drill to the right depth. After drilling, drop a Kreg Deck Screw into the guide and use the included square - drive driver bit to insert it. The stop collar on the driver bit ensures the screw goes in to the perfect depth. When working near walls or at board joints, the three different - angled guides will give you easy access. Make sure to use the spacer rings to keep proper spacing between deck boards for good drainage. Check our Screw Selector to pick the right screws for your deck type. As for maintenance, keep the jig clean and dry after use. If it gets dirty, you can use a mild soap and water to clean it. Store it in a dry place to prevent rusting, especially for the hardened - steel parts. And remember, the product has a 1 - year warranty, so if you have any issues, you can reach out for support.
