This heavy - duty drill pump is an excellent choice for most power drills and is ideal for transferring oil and various fluids. It features a 6mm drill shaft and a 1/2 - inch diameter hose. With a maximum output of 1500 litres per hour at 3000 rpm, it can efficiently move large volumes of liquid. It can pump up to a height of 15 meters and has a maximum output pressure of 3 bar at 3000 rpm. Also, it can self - prime up to 300cm, ensuring reliable operation in different situations.
Using this drill pump is easy. First, attach the pump to your power drill. Make sure the drill is set to the appropriate speed. Then, connect the 1/2 - inch diameter hose to the pump and place the other end where you want to transfer the fluid. Start the drill, and the pump will begin to work. When using, avoid overloading the drill and the pump. Do not run the pump dry as it may damage the internal components. After each use, clean the pump with clean water to remove any remaining fluid. Store the pump in a dry place to prevent rust and damage.
