This expansion kit includes an Infrared temperature controller, four tire temperature sensors, a power cable, two 1 - meter 4 - pin patch cables, and two 2 - meter 4 - pin patch cables. AIM's Infrared Tire Temperature sensors are specially crafted to measure tire surface temperatures. This data is incredibly valuable for chassis tuning, getting the most out of your tires, and understanding driver behavior. The sensors have a 35 - degree field of view, measure temperatures from - 20°C to 120°C, and give a 0 - 5V output signal. The four sensors come with an Infrared Temperature Controller, which is essential for connecting to MyChron5 or Mychron 6. These devices will display and store all the sampled data for later analysis. Technical details include a connection to MyChron5 via the IR Temperature Controller, an output signal of 0 - 5V, a 35 - degree field of view, a temperature range of - 20°C to 120°C. The IR temperature controller measures 127.6 x 32 x 39 mm, the sensors are 26.6 x 17.2 mm, the sensor cable is 250 mm long, and the IR temperature controller cable is 400 mm long.
Using this tire temperature sensor expansion kit is easy. First, connect the Infrared Temperature Controller to your MyChron5 or Mychron 6 device. Then, attach the four tire temperature sensors to the appropriate locations on your vehicle's tires. Plug in the power cable and use the 4 - pin patch cables to complete the connections. Once everything is set up, the sensors will start measuring the tire surface temperatures. The data will be displayed on your MyChron device and stored for later analysis. When using the kit, make sure the sensors are properly positioned for accurate readings. Avoid exposing the sensors and the controller to extreme conditions like very high heat or moisture. For maintenance, keep the sensors and cables clean. If you notice any damage to the cables or the sensors, replace them immediately to ensure accurate data collection. Regularly check the connections to make sure they are secure.
