Clarke CBS1 - 5B Belt and Disc Sander
This is a highly convenient multifunctional belt and disc sander. It's a perfect choice for DIY enthusiasts, hobbyists, and professional craftsmen.
With its 45 - degree tilting sanding tables and a +/- 45 - degree adjustable fence on the sanding disc table, this tool can handle a wide variety of projects.
FEATURES
- It comes with a 25.4mm (1”) x 762mm belt and a 125mm (5”) diameter disc.
- Both the sanding belt and disc tables can tilt and lock from 0° to 45°.
- The sanding disc table has a +/- 45° adjustable fence.
- There is a 38mm extraction port with a 45mm adaptor.
- The belt table size is 184x98mm, and the disc table diameter is 148mm.
- The disc rotates at a speed of 2850rpm.
- It weighs only 7.5kg, making it easy to move around.
Warranty
It comes with a 1 - year manufacturer warranty.
Using the Clarke CBS1 - 5B Belt and Disc Sander is easy. First, decide if you're going to use the belt or the disc for your project. Adjust the sanding tables to the 45 - degree angle if needed by tilting and locking them. You can also set the adjustable fence on the disc table within the +/- 45 - degree range according to your project requirements. When starting the sander, make sure the disc speed of 2850rpm is suitable for your task. Remember to connect the extraction port (38mm with a 45mm adaptor) to keep the work area clean. As for maintenance, regularly check the belt and disc for wear and tear. Keep the sander in a dry place when not in use. The sander has a 1 - year manufacturer warranty, so if you have any problems, contact the manufacturer. Be careful when operating to avoid any injuries.
