DESCRIPTION
This high - quality belt and disc sander is an essential tool for any workshop. It's perfect for working with woods, most plastics, and non - ferrous metals. Here are its amazing features: It has a 370 - Watt, 230V motor. The 6 - inch (150mm) diameter disc spins at 2850 rpm. The 4 - inch x 36 - inch (100 x 914mm) belt can be tilted and locked at any angle from 0 to 90 degrees and runs at 450 meters per minute. Safety is a priority with a finger guard on the belt, full disc guarding, and a locking on/off switch. Its robust cast - iron construction ensures rigidity and long - lasting performance, and it comes with a 60mm dust extraction port. A removable sanding table (225 x 160mm) is included for use with either the sanding belt or disc. The sander measures 447 x 363 x 255mm in dimensions and weighs 18.7kg. It also comes with a 1 - year manufacturer warranty. Click here for the product manual of the Clarke CS4 - 6E Belt & Disc Sander.
Using your Clarke CS4 - 6E Belt and Disc Sander is easy. First, make sure the sander is plugged into a 230V power source. For sanding, you can choose between the disc and the belt depending on your project. If you need to change the angle of the belt, just unlock it, set it to the desired angle between 0 and 90 degrees, and then lock it in place. When working, always use the safety features like the finger guard on the belt and the full disc guarding. Keep the on/off switch locked when not in use. The removable sanding table can be used with either the belt or the disc. Place your workpiece on it for more stable sanding. To keep your sander in good condition, regularly clean the 60mm dust extraction port to prevent dust build - up. Also, check the motor and moving parts from time to time for any signs of wear. If you encounter any problems, refer to the product manual or contact the manufacturer as it comes with a 1 - year warranty.
