This Neilsen CT0971 barrel pump offers a fast and hassle - free way to dispense fuel oil, lubricating oil, and other non - corrosive liquids from barrels, tanks, and oil drums. It's self - priming and comes with an easily - turned hand crank. Note that it's not for water or corrosive liquids. It can output 22 litres per minute, with a suction distance of 1.5M and a lift distance of 5M. The flow rate is 22L/MIN, the rotary rate is 70, the outer diameter is 32MM, the inner diameter is 29MM, and the pipe length is 90cm (35 inches).
Using this Neilsen CT0971 barrel pump is easy. First, make sure the pump is properly placed in the barrel, tank, or oil drum. Then, start turning the hand crank slowly to prime the pump. Once it's primed, you can turn the crank at a steady pace to dispense the non - corrosive liquid. Remember, this pump is not for water or corrosive liquids. If you use it with the wrong type of liquid, it may damage the pump. For maintenance, after each use, clean the pump thoroughly with a suitable non - corrosive cleaner. Check the parts regularly for any signs of wear and tear, and replace any damaged parts promptly to keep the pump working well.
