Clarke Clarke X-Pro CAT170 Air Needle Scaler Kit

This air needle scaler kit offers a highly efficient way to remove thick paint or rust from metal surfaces. It's perfect for marine and industrial uses. The scaler features an average air consumption of 3.5 cfm, a max hammer speed of 4600 bpm, and a palm - control trigger mechanism for easy operation. It comes with a steel barrel and has 3 needle positions to adjust the needle force. With a max air pressure of 6.2 bar (90 PSI) and 4600 blows per minute, it ensures powerful performance. The average no - load air consumption is 3.5 cfm, and on load at 6.2 bar, it's 14.8 cfm. It also comes with a 1 - year manufacturer warranty.

Using this air needle scaler kit is quite easy. First, make sure the air pressure is set to a maximum of 6.2 bar (90 PSI). Connect the scaler to a suitable air source. You can adjust the needle force according to your needs using the 3 needle positions. Hold the scaler with the palm - control trigger mechanism for a comfortable grip and start removing paint or rust from the metal surface. When using, always wear appropriate safety gear like goggles. Don't use it if the air pressure is too high as it may damage the scaler. For maintenance, keep the steel barrel clean. After use, disconnect it from the air source and store it in a dry place. The kit comes with a 1 - year manufacturer warranty, so if there are any problems, contact the manufacturer.