This heavy-duty air punch flange tool from Neilsen is a game-changer. Its head can rotate a full 360°, enabling you to effortlessly crimp flanges, lap joint sheets, and pipes. Ideal for auto sheet metal work, it excels at drilling, punching, and folding tasks. With a working pressure of 90 PSI and an average air consumption of 4CFM, it offers efficient performance. The punch hole diameter is 5mm, and it can handle punching hole thicknesses from 0.8 - 1.2mm. The 1/4'' air inlet ensures a proper air supply for smooth operation.
Using this Neilsen air punch flange tool is straightforward. First, connect the tool to an air supply using the 1/4'' air inlet. Make sure the air pressure is set to 90 PSI. Place the material you want to work on under the punch. If you're crimping flanges or lap joint sheets, position them correctly and then activate the tool. For auto sheet metal drilling, punching, or folding, adjust the tool as needed and start the operation. When it comes to maintenance, keep the tool clean after each use. Check the air inlet regularly for any blockages. If you notice any decrease in performance, such as lower punching power, it might be time to check the air consumption and pressure settings. Always store the tool in a dry place to prevent rusting. Also, be careful when handling the tool as it has sharp parts that can cause injury.
