Clarke Air Filter Regulator
This amazing air filter and regulator combo is a game - changer. It keeps the output pressure steady and delivers clean air, making your air tools work more reliably and last longer.
- Maximum supply pressure: 14.7 bar (213 PSI)
- Maximum outlet pressure: 9.7 bar (140 psi)
- Regulating pressure range: 0.5 - 8.3 bar (7 - 120 PSI)
- Inlet/outlet port: ½” BSP
- Comes with a ½” to ¼” BSP converter and a wall bracket
- Gauge range: 0 - 10.3 bar (0 - 150 PSI)
- Bowl capacity: 45 cm² with automatic drain
- Maximum flow rate at 6.2 bar: 41 cfm
Using this Clarke air filter regulator is easy. First, connect it to your air supply using the ½” BSP inlet port. You can use the included ½” to ¼” BSP converter if needed. Then, adjust the regulating pressure to a value between 0.5 - 8.3 bar (7 - 120 PSI) according to your air tool's requirements. Keep an eye on the gauge to monitor the pressure. When it comes to maintenance, the automatic drain of the 45 cm² bowl will help get rid of moisture. But still, check it regularly. Also, make sure the supply pressure doesn't exceed 14.7 bar (213 PSI) and the outlet pressure stays below 9.7 bar (140 psi) to avoid any damage to the device and your air tools.
