This Draper 50L direct drive air compressor, with a 1.5kW/2hp motor, is perfect for both workshop and site work. It comes with thermal motor protection against overload, an on/off pressure switch, a pressure regulator, and a pressure gauge, enabling precise and controlled operation. Thanks to its wheels and transport handle, moving this compressor around is a breeze. Specification: Tank size is 50L. The 1.5kw (2.0HP) motor has an air displacement of 7.3cfm (206L/min) and delivers free air (FAD) at 4.0cfm (113L/min). The input current is 13A, and it runs at 2850rpm. The maximum pressure is 116psi (8bar). The sound pressure level is 74.4dB, and the sound power level is 97dB. It measures 765 x 325 x 705mm and weighs 33kg. Check out the Draper 50L Compressor Product Manual for more details.
Using this Draper air compressor is easy. First, make sure it's plugged into a proper power source with the right current. Then, turn it on using the on/off pressure switch. You can adjust the pressure with the pressure regulator according to your needs and monitor it on the pressure gauge. When moving it, just grab the transport handle and use the wheels. Here are some important things to note. Don't overload the motor, or the thermal protection will kick in. Keep it in a well - ventilated area to avoid overheating. For maintenance, regularly check the pressure levels, the motor, and the wheels. Make sure to refer to the product manual for more in - depth maintenance instructions and safety guidelines.
