DESCRIPTION
The Clarke Bandit V portable air compressor is a top - notch choice for both DIY enthusiasts and trade professionals. With an 8 - litre capacity, 4.2cfm air displacement, and a maximum working pressure of 8bar, it's great for various applications like deck building, carpentry work, flooring installation, fencing projects, paneling jobs, and even craftwork. It also excels at paint spraying, tyre inflation, and blowing tasks. This high - value kit includes the quality Bandit V compressor and a lightweight, high - performance, easy - to - use air nailer/stapler suitable for a wide array of uses. Along with these, you'll get a recoil hose, fittings, and a starter pack of nails and staples, so you can start right after unpacking. The compressor features 750W - 230V power, automatic on/off control, and an air pressure regulator. It has an 8L receiver capacity, and the air gun can handle 18 - gauge nails up to 50mm and type 90 narrow crown staples up to 40mm. The compressor measures 460x225x450mm, the gun is 254x55x253mm, and the whole setup weighs 17.4kg. It comes with a 1 - year manufacturer warranty.
Using your Clarke Bandit V Air Compressor Nailing and Stapling Kit is easy. First, make sure the compressor is properly connected to a 230V power source. Then, adjust the air pressure regulator according to the requirements of your task. For different applications like decking or carpentry, you may need different pressure settings. When using the air nailer/stapler, load the appropriate nails or staples into the gun. Remember to use 18 - gauge nails up to 50mm or type 90 narrow crown staples up to 40mm. Hold the gun firmly and position it at the right angle before firing. As for maintenance, keep the compressor clean and free from dust and debris. Check the oil level regularly (if applicable) and make sure all the fittings are tight. After each use, release the air pressure from the compressor. Also, store the kit in a dry place. And don't forget, this kit comes with a 1 - year manufacturer warranty, so if you have any issues, contact the manufacturer.
